Chlorinated polyethylene impact modifier
Grades | Mooney Viscosity ML(121°C 1+4) | Application |
CPE135B | 70-80 | It is widely used for hose, wire / cable and molded products. Not only it can be used as halide rubber solely but also it can be mixed with CR, CSM, NBR, SBR and NR at any proportion. |
CM352 | 55-70 | Low Viscosity grade, widely used for hose, wire / cable and molded products. Not only it can be used as halide rubber solely but also it can be mixed with CR, CSM, NBR, SBR and NR at any proportion. |
CM353 | 85-100 | High viscosity grade for highly filled hose, cable jackets, HPN cords, sponge and molded Products. Not only it can be used as halide rubber solely but also it can be mixed with CR, CSM, NBR, SBR and NR at any proportion. |
CPE130A | 75-85 | It is one kind of high filling and low temperature resistance chlorinated polyethylene thermoplastic elastomer, which is used for magnetic rubber production and also used as modifier for non-polar rubber for example EPDM. |
Application :
1.Automobile Hoses and Industrial Hoses.
2. Wires and Cables.
3. Various Types of Specialized Rubber Products.
4. Combined use of CM with other rubbers.
5. Application in Magnetic Materials.
(Refrigerator sealing strip; Magnetic rubber rings in computers and micro motors).