Chlorinated polyethylene CM35
Tech Specs:
Items UNIT INDEX Test Method
Chlorine content % 35±1 ISO 7725
Heat of Fusion J/g ≤1.5 DSC
Volatile Matter component % ≤0.3 ISO 1269
Rate of filtration(40 mesh) % ≥98 --
Shore Hardness A ° ≤60 ISO 7619
Tensile strength Mpa ≥6.0 ISO 37
Elongation at break % ≥600 ISO 37
Mooney Viscosity ML(125°C 1＋4) -- 70-80 --
Whiteness E457 ° ≥80 --
Application: It is widely used for hose, wire / cable and molded products.Not only it can be used as halide rubber solely but also it can be mixed with CR, CSM, NBR, SBR and NR at any proportion.
Package : 25kg PP valve bag ; 25kg Woven bag with PE liner ; 500/550kg super sack The product can be stored under appropriate conditions for two years. But please keep products store in a dry ventilated environment (temperature should not exceed 30°C, in low humidity). Inappropriate storage environment may cause agglomeration.Especially at high temperatures & high humidity, it is recommended not to stack more than 30 days long, it may increase agglomeration phenomenon. Agglomeration does not affect the quality and performance , not a quality problem, but Agglomeration material is smashed before using . It is not dangerous cargo .You should handle the material according to the instruction described on MSDS.The MSDS is available from sales department once required.