Chlorinated polyethylene 235A
235A is specially designed for PVC pipe application, such as PVC pressure pipe, drain pipe, electrical conduit etc. High cost/performance efficiency.
Specification:
Items UNIT INDEX Test Method
Chlorine content % 35±1 ISO 7725
Heat of Fusion J/g ≤2.0 DSC
Volatile Matter component % ≤0.4 ISO 1269
Rate of filtration(40 mesh) % ≥ 98 --
Shore Hardness A ° ≤65 ISO 7619
Thermal decomposition ° ≥170 --
Bulk density g/cm3 ≥0.5 --
Tensile strength Mpa ≥6.0 ISO 37
Elongation at break % ≥600 ISO 37
Impurity particle PC/100g <15 --
Whiteness E457 ° ≥80 --
Applications: All kinds for Pvc pipes ,wall panel ,ceiling panel , profiles and so on.
Package and Storage: 25kg polymeric bag ; or 500/550kg super sack. The product can be stored under appropriate conditions for two years. But please keep products store in a dry ventilated environment (temperature should not exceed 30°C, in low humidity). Inappropriate storage environment may cause agglomeration.Especially at high temperatures & high humidity, it is recommended not to stack more than 30 days long, it may increase agglomeration phenomenon. Agglomeration does not affect the quality and performance , not a quality problem, but Agglomeration material is smashed before using . It is not dangerous cargo .You should handle the material according to the instruction described on MSDS.The MSDS is available from sales department once required.